now that the Virus TI|2 hasn't met my expectations aesthetically (also, how many times are they going to repackage the same synthesizer???), I can safely look back to the Solaris again. Does anyone have any real photos of the finished product? Things to do in Vegas
The only thing that will be different is the color of the ribbon; the surface piece was supposed to be the same color as the case, with grey printing, but this was reversed by mistake!
You can also note a different graphic for the upper right 'Solaris'....I guess I should make some proper still shots, though.
-john b.
John Bowen wrote:OK, I did some quick snapshots for those of you who want to see the production version of the Solaris. Please have a look at the set of photos here: http://www.flickr.com/photos/solaris_sy ... 5005848768
The pitch/mod wheel section seems a little poor. No labels, no buttons. How do you assign their functionality?
Also, doesn't "VCAs" seem misleading? Just saying.
ThreeFingersOfLove wrote:The pitch/mod wheel section seems a little poor. No labels, no buttons. How do you assign their functionality?
Also, doesn't "VCAs" seem misleading? Just saying.
Ah, you are correct - we didn't label the Pitch and Mod wheels - do you think it's necessary?
re: assigning wheels - the Pitch Wheel is not assignable at this time. The Mod Wheel appears in the Mod Source List, both individually and summed with Aftertouch.
re: VCA - we had 'Amps' in the first version, but kept saying 'VCAs' when discussing things, and so decided to change it, even though it's not 'technically 'correct. How about 'Virtual Controlled Amp'?
JB I want those colors, side panels and everything just like that model.
But the Magenta reminds me of mistakes. As a child my Classical Piano teacher always used Magenta eyeglasses all over my sheet music.
2 Blues better match the LCD's.
Skip the labels on the Mod section for me, maybe the Guitar Center demos might need them though...
I haven't used a PBend or ModWh for years, but when I sit in friends groups I do have to revert to the old style " Look Mom........1 Hand."
I re assign all of those w/ a MIDI Solution F8 since an expresssion pedal can be much more..............well, expressive.
I use the ModWheel, since it's not spring fed, to control my Master Send to FOH.
Thnaks for the pics though, the synth is ready for stage IMHO.
Magnus C350 on a TV Dinner Tray Stand with 2 x PigNose Amps for stereo
Magenta? You mean the Pitch Wheel color....ah. Well, these are not standard, as you know, and anyone who ordered the LED wheels can change the colors (although this requires opening up the synth to access the DIP switch to do so).
Standard wheels will be the Fatar wheel assembly as seen in the earlier prototype photos....
Blue LEDs are too harsh- I actually couldn't stand them on the Voyager and the DSI PEK. Last time my Voyager went back to Moog for updates I had them change the LED to red (fire), much easier on the eyes.
Do you mean we can just buy the custom wheels and change the colors when we get bored the Light du Jour...?
Thats nice.
I thought they came as a certain color as in a fixture...
If I have a shitty night I will use dual magenta to remind me of the pathetic performance.
Blue will mean I was cool ( OK ) the night before.
Red will mean I smoked down the house the night before and remind me to pat myself on the back.
Yellow will mean I was shaking because Chick Corea was in the audience the night before.
Green will mean I was very jealous as some chump ran off with the trim I wanted.
Pink will remind me I woke up with a guy in the morning and couldn't remember anything since its possible I was drugged.
So each night after the gig I shall set the colors before I leave accordingly.
Coolness...
Magnus C350 on a TV Dinner Tray Stand with 2 x PigNose Amps for stereo
Of course there have been requests to make the LED color switches digitally programmable.....which would require some converters and additional hardware, a different circuit board, etc., etc....more than I think we want to get into right now.
If you really wanted to change things that often, without opening up the case....well, maybe you could make a parallel switch board and have it hang outside of the case, attached with one cable.....
Careful next Jimmy will be asking how to get DMX integration added to the pitch/mod color change mechanism so his MPC can do them in sync with his great stage light programs...
That would be awesome, but I'm still stuck with JLCooper w/ PAR Lamps.
Some Dinosaurs are still alive.
I've had his Fader Master since 1998, and his original MIDI Lighting Controller from 1986........
So nice to be unslaved from WIndows, but sadly MAC lights are everywhere now except a few rooms.
Magnus C350 on a TV Dinner Tray Stand with 2 x PigNose Amps for stereo